Medical protective clothing is the work clothes of medical staff to block germs, harmful ultrafine dust, acidic solutions, salt solutions, and adhere to environmental cleaning. Use PP (polypropylene, 62% of the total) non-woven material, covered with a special breathable film for protective clothing, strong air permeability, anti-static; better anti-permeability, in resistance to a variety of organic solvents, acid and alkali corrosion Together, it has high impact resistance. The mechanical properties are strong and the texture is soft and comfortable. Non-combustible, non-toxic and non-influencing protective clothing, the use of disposable protective clothing is harmless to the skin.
1. Surface moisture resistance
The water level on the outside of the protective clothing should not be lower than the level 3 requirements of GB/T 4745-1997.
2. Cracking strength
The cracking strength of the protective clothing sample material should not be less than 45N.
3. Elongation at break
The elongation at break of the protective clothing sample material shall not be less than 30%.
4. Filter power
The filtering power of protective clothing for non-oily particles is not less than 70%
5. Flame retardant function
The protective clothing with flame retardant function Changwei understands that it should meet the requirements of B2 level in GB 17591-1998.
6. Antistatic
The electrical charge of the protective clothing should not be greater than 0.6uC.
7. Skin impact
Protective clothing materials should have no skin effect
8. Microbial Target
The protective clothing should meet the requirements of the microbiological target in GB 15979-2002. Protective clothing with the words "sterilization" or "sterilization" or pictures on the packaging should be sterile.
